今天給大家分享的是2014年4月份 《Fuel》上發(fā)表的一篇名為：The effect of preparation method of the Cu–La2O3–ZrO2/γ-Al2O3 hybrid catalysts on one-step synthesis of dimethyl ether from syngas
文章摘要如下：
Cu–La2O3–ZrO2/γ-Al2O3 hybrid catalysts were prepared by four different preparation methods. The catalysts were characterized by N2 adsorption and desorption, N2O adsorption, X-ray diffraction (XRD), temperature programmed reduction (H2-TPR), temperature programmed desorption (NH3–TPD) and Fourier transform infrared (FTIR), followed by the evaluation for the one-step synthesis of dimethyl ether from syngas. The hybrid catalyst prepared by mixing freshly obtained precursors of both components possessed the highest CO conversion (73%) and DME yield (58%). It was revealed that the superior catalytic performance was not only ascribed to the amount of highly dispersed copper species with smaller particle size, which was benefit for the CO adsorption linearly, but also to the amount of acidic sites with medium strength.
該文章中材料表征采用的是美國麥克儀器AutoChem 2920
詳情可參考下面鏈接：
http://www.sciencedirect.com/science/article/pii/S0016236113011940
13
立即詢價
您提交后，專屬客服將第一時間為您服務