SANTEST_GYFC2位移傳感器控制器
GYFC2是日本SANTEST公司生產(chǎn)的線性位移傳感器控制器,高精度,高品質(zhì),:
GYFC2 controller enjoys the top analogue performance. GYcRP, GYcRS, GYMR5 and GYFRS probes can be associated with this controller. Monitoring cable-disconnect and magnet-drop are standard features of GYFC2. Velocity output is optional.
|
Specifications
Resolution (position output) | 0.005%FS (Probe:GYcRS, GYMR5, GYFRS) / 0.01%FS (Probe:GYcRP) |
Temp drift | ±20ppmFS/°C |
Position Output (OUT1) | 0-10V (output current:Max.5mA, load:Min.2kΩ) |
Position Output (OUT2) | 4-20mA (load:Min.500Ω) or inverted output etc |
Velocity output (OUT2) (Option) | ±10V(Resolution:1%FS) |
Alarm output | Contact 1A 30VDC (Cable disconnection and magnet drop) |
Power supply | +24VDC±5% ( < 350mA) (Note1) |
Frequency resp. | Std 1kHz(depending on stroke) Sampling |
Operating Temp | 0°C-+60°C |
Storage Temp | -20°C-+85°C |
The above mentioned accuracy applies to sensors with an effective stroke of 300mm or more.
Zero/full sacle adjust in ±3%FS can be possible by trimmer equipped.
(Note1) Optionally, user can select the following power supply.
±15VDC type:+15V (±5%) < 200mA, -15V(±5%) < 100mA
+12VDC type:+12V (±5%) < 700
Model No. 
(1):Probe RS:GYcRS probe RP:GYcRP probe R5:GYMR5 probe FS:GYFRS probe (2):Effective stroke (mm) (3):Dead zone length of probe head side (mm) (4):Analogue position output
| Output1 (OUT1) | Output2 (OUT2) | A | 0-10V | 0-10V | BD | 0-10V | 4-20mA | BR | 0-10V | 20-4mA | CB□□ (bipolar output) [ex] CB10 CB5 | -□□V-+□□V
-10V-+10V -5V-+5V | +□□V--□□V
+10V--10V +5V--5V | VD Z/F [ex] VD1/5 VD0.5/9.5 | customer's request 1V-5V 0.5V-9.5V | - | VR Z/F [ex] VR5/1 VR9.5/0.5 | - | custom order 5V-1V 9.5V-0.5V | I Z/F [例] I5.12/19.34 I20/5.38 | - | custom order 5.12mA-19.34mA 20.00mA-5.38mA |
*Z=zero point *F=full scale point (5):Power supply 24S:+24VDC (Standard) 15W:±15VDC (Option) 12S:+12VDC (Option) (6):Magnet and Float Magnet | Float | M0:No.Φ magnet M0SM:No.ΦSPM magnet M0LM:No.ΦLPM magnet M2P:No.2P magnet M2PN:No.2PN magnet M3:No.3 magnet M11:1 magnet M11N:1N magnet T142:No.T14-M2 magnet T144:No.T14-M4 magnet T162:No.T16-M2 magnet T163:No.T16-M3 magnet MG□:other magnet | F28S:Φ28SS316 loat F30S:Φ30SS316 loat F40S:Φ40SS316 (B) loat F42S:Φ42.5SS316 loat F50S:Φ50SS316 loat F54S:Φ54SS304 loat F25N:RF-A10 plastic float F28N:RF-A6 plastic float FL□:other float |
(7):Option (blank:No option) Velocity output (Note2) V[ ] ([ ]:Max speed (mm/sec)) (Note2) You can specify max speed within 3%-300%/sec of effective stroke(mm). (ex:effective stroke=300mm, 9mm/sec-900mm/sec) |

|